Home › Knowledge Base › Materials & Science › Palm Leaf Plate Sizes

MATERIALS & SCIENCE · PLATE SIZES

What sizes do palm leaf plates come in?

Our round palm leaf plates come in 6, 7, 8, 9, 10 and 12 inch, measuring 15 to 30 cm across. Square plates run from 4 to 10 inch (11 to 25 cm), including a deep 9.5 inch. We also make two rectangles, a 20 x 15 cm oval plate and a 6 inch heart. Compare plates in centimetres.

For importers, distributors and catering buyers who need the measured sizes before they plan a container.

The short version

  • 13 coded plates on Spec Sheet v1.0: 6 round, 5 square, 2 rectangle.
  • Four more plates we make that are not on Spec Sheet v1.0: a 4 inch square, a deep 9.5 inch square, an oval plate and a 6 inch heart.
  • A 10 inch round plate is 25 cm; a 12 inch round is 30 cm.
  • We make two lines, Classic with a 3 mm rim for dry food and Standard with a 5 mm rim for wet food. Many sizes come in both; confirm the line for each size with your quote.
  • Every coded plate packs 100 pieces to a carton, in four shrink-wrapped packs of 25.
  • Sizes can be mixed in one container, with at least 200 cartons per product category.

What are the exact measurements of each plate size?

This is the plate list from our spec sheet. The first column is the name the trade uses. The second is what the plate measures, then the depth. The third is the line the spec sheet lists that code under today. The last column is how many cartons of that one plate a 40ft high cube takes on volume alone; a real order mixes sizes, so treat it as a guide for costing.

Plate Measures (cm) Line on the spec sheet Pieces per carton Carton (cm) Carton CBM Cartons per 40ft HC, one product
6″ round Ø 15, 2.5 deep Standard, 5 mm 100 50 x 16 x 16 0.0128 5,234
7″ round Ø 18, 2.5 deep Classic, 3 mm 100 45 x 19 x 19 0.0162 4,135
8″ round Ø 20, 2.5 deep Classic, 3 mm 100 50 x 21 x 21 0.0221 3,031
9″ round Ø 24, 2.5 deep Classic, 3 mm 100 48 x 26 x 26 0.0324 2,067
10″ round Ø 25, 2.5 deep Standard, 5 mm 100 45 x 26 x 26 0.0304 2,203
12″ round Ø 30, 3 deep Standard, 5 mm 100 47 x 31 x 31 0.0452 1,482
6″ square 16 x 16, 2 deep Classic, 3 mm 100 42 x 17 x 17 0.0121 5,537
7″ square 18 x 18, 2 deep Classic, 3 mm 100 42 x 19 x 19 0.0152 4,407
8″ square 20 x 20, 2 deep Classic, 3 mm 100 42 x 21 x 21 0.0185 3,621
9″ square, rimless and shallow 24 x 24, 2.2 deep Classic, 3 mm 100 42 x 26 x 26 0.0284 2,359
10″ square 25 x 25, 2 deep Classic, 3 mm 100 47 x 26 x 26 0.0318 2,106
6″ x 4″ rectangle 15 x 11, 2.5 deep Standard, 5 mm 100 42 x 16 x 12 0.0081 8,271
9″ x 6″ rectangle 24 x 16, 2.5 deep Standard, 5 mm 100 42 x 25 x 17 0.0179 3,743

We also make four plates that are not on Spec Sheet v1.0. We give the size here, and the carton and CBM come with your quote.

Plate Measures (cm) Line Carton and CBM
4″ square 11 x 11, 2 deep Classic On request
9.5″ square, rimmed and deep 24 x 24, 2.5 deep Standard On request
Oval plate 20 x 15, 2.5 deep Confirm with your quote On request
6″ heart About 15 across, 2.5 deep Confirm with your quote On request

Look at the 9 and 10 inch rounds. On paper they are an inch apart. In the hand they are 24 cm and 25 cm. If your customers know plates by the centimetre, sell them that way.

Bowls and oval platters are separate ranges with their own sizes. The platters are 30 x 19, 36 x 25 and 42 x 26 cm, and they can go in the same container as the plates. Full codes and carton weights are on the spec sheet and the palm leaf plates product page.

Is there an industry standard for palm leaf plate sizes?

No. We know of no ISO or EN standard that fixes the diameter of a palm leaf plate, and Indian makers label their sizes loosely. One supplier’s 10 inch can be another’s 9.5 inch.

So the standard you work to is the supplier’s spec sheet. Ask for the measured size in centimetres, the rim, pieces per carton and carton volume for every item. If a supplier can only give you inch names, ask for samples and measure them before you sign anything.

Each plate is pressed from one fallen leaf sheath, so every size is nominal. The mould fixes the outline and depth. The leaf decides the grain and shade, and those vary from piece to piece.

Which plate size should I order for mains, starters and desserts?

Start from the food, then pick the size and the line.

Use Plate we would suggest
Canapés and petits fours 4″ square
Cake and dessert 6″ round, 6″ square or the 6″ heart
Starters, tasting menus 7″ or 8″ square, or 7″ round
Lunch plate, dry food 8″ or 9″ round
Main course with sauce 10″ round or 9.5″ deep square, Standard line
Sides, snacks, street food 6″ x 4″ or 9″ x 6″ rectangle, or the oval plate
Sharing and buffet 12″ round, or an oval platter

Our view: a first container works best with one dinner size as the bulk of the load and two or three smaller sizes around it. The 10 inch round in the Standard line is the natural dinner size, because its 5 mm rim holds a wet main course.

Does the rim line change which size I should order?

It changes what the plate is for more than its size. Classic plates have a 3 mm rim and suit dry food. Standard plates have a 5 mm rim and hold curry, pasta and dressed salad.

We make both lines, and many sizes come in both. The spec sheet table above shows the line each code is listed under today, so ask for the line you want size by size and we confirm it on the quote. If the food is wet, ask for Standard.

Neither line is a better grade. Grade is set on appearance only, and leaf thickness is natural, so we do not sell by thickness. The full comparison is in palm leaf plate weight, rim and container specs.

How many plates fit in a carton and in a container?

Every plate on the spec sheet packs 100 pieces to an outer carton, as four packs of 25, each shrink-wrapped. Inner packs of 10 and cartons of 200 can be done on request; they change the carton size slightly. We keep every carton under 18 kg so it can be lifted by hand.

A 40ft high cube has about 67 CBM of usable space and takes 300,000 to 350,000 pieces in a normal mix of plates, bowls and platters. A 20ft holds about 120,000 to 150,000 pieces. Small rounds push you towards the top of the range; big squares and platters bring it down. The container calculator lets you test your own mix.

What is the price of a 10 inch areca plate?

We do not publish a price for each size. Areca leaf plates sit in a band of USD 0.032 to 0.117 per piece, FOB New Mangalore Port, covering Economy and Premium quality. Where a 10 inch plate lands in that band depends on the grade, the line, the packing and the mix of the whole container. Send us the mix and we quote it as one container.

What is the minimum order per size?

There is no minimum per size, only per product category. The minimum order is one 20ft container for the Ecodyne Tableware brand or one 40ft high cube for white label. Inside it you can mix sizes and shapes, as long as each product category reaches 200 cartons. We load within 10 days of the confirmed order and deposit, and pay a 1% penalty for every day we are late. The full terms are on wholesale terms and shipping.

Questions buyers ask

Do you make a 25 cm plate?

Yes, two. The 10 inch round plate in the Standard line measures 25 cm across, and the 10 inch square plate in the Classic line measures 25 x 25 cm.

Do you make 14 inch palm leaf plates?

No. The largest round plate on our spec sheet is the 12 inch Standard, at 30 cm. For anything bigger we point buyers to our oval platters, the largest of which is 42 x 26 cm.

What shapes are available besides round?

Square plates from 4 to 10 inch, including a deep 9.5 inch Standard square, two rectangles of 15 x 11 cm and 24 x 16 cm, a 20 x 15 cm oval plate and a 6 inch heart. Bowls and oval platters are separate ranges. All of them can be mixed in one container.

Can I order a size that is not on the list?

Ask us with the size and the yearly volume. A new size needs its own pressing die, so we quote it job by job; it makes sense for steady repeat volume and rarely for a one-off shipment.

How heavy is a carton of plates?

It depends on the size. A carton of 100 10 inch round Standard plates weighs about 6 kg gross, and a carton of 100 12 inch rounds about 8 kg. Every carton stays under 18 kg.

Will every plate in a carton be exactly the same size?

The outline and depth come from the mould, so they repeat. Grain, shade and surface come from the leaf and vary from plate to plate, which is why spec sheet sizes are nominal. Order samples first if uniformity matters to your customer.

What colours do your palm leaf plates come in?

One colour: the leaf’s own. We add no dye or coating. Grain and shade therefore vary from plate to plate, even within one carton. The mould fixes each plate’s outline and depth, so those repeat while the shade does not. For sizes, see the tables above. If an even look matters to your customers, order free samples first to judge the spread of shades.

Sources

Send us your size mix and we will send back a container quote with cartons and CBM worked out. Open a trade account · Request a quote

Request a Quote

Wholesale palm leaf tableware, FOB New Mangalore Port. Share your monthly volumes and SKUs.

Send Wholesale Enquiry

Order Samples

Free samples, courier at buyer's cost. Tell us which sizes to evaluate.

Send Sample Request

Request Documentation

LFGB, ISO, USDA and full spec sheets in one compliance pack.

Get Documentation

Container Calculator

Plan your shipment — estimate FCL loading, CBM and MOQ. No pricing, no signup.

Open Calculator
Scroll to Top